User's Manual

- 33 -
Auto-On check is an automatic finger detection function. If
someone place finger on the sensor, it detects finger and simuates
pressing Enter Key.
The initial setting is 『ON』. Move to the value you want to choose
with the direction keys and press the Enter key.
Ａｕｔｏ－Ｏｎ Ｃｈｅｃｋ
ＯＮ ／ ＯＦＦ
 1:N Timeout Setting
In case of 1:N identification, FAIL message will occur if
identification is not completed within time that specified in Option
menu. This is for avoiding making users wait too long.
Decide whether to use 1:N Timeout. The initial setting is 『ON』.
Move to the value you want to choose with the direction keys and
press the Enter key.
1:N TIMEOUT
1. Use Timeout
ＯＮ ／ ＯＦＦ
Next, you can set timeout value. If you choose『OFF』, this menu
won’t appear. The initial setting is 2 sec.
1:N TIMEOUT