User's Manual

- 41 -
 Wiegand
Decide whether to use wiegand protocol for transmission
authentication result and user ID to sever.
※ LFD Terminal does not set up. Default value is OFF.
ＷＩＥＧＡＮＤ
ＯＦＦ/２６ｂｉｔ／３４ｂｉｔ
 OFF
You don’t want to use wiegand protocol.
SUCCESS !
 26bit
When you select 26bit protocol, you can set up the Facility
Code (1-255).
RF is optional. If the terminal is not equipped with RF
module, this feature is not available.