User's Manual

- 51 -
 Network Timeout
When the terminal communicates with the server via the network,
it will be assumed that the network connection is disabled if there
is no response within the specified time. You can specify a value
between 2 and 20. If the network environment is not stable, start
with 5 seconds and then increase the value gradually.
Ｎ／Ｗ Ｔｉｍｅｏｕｔ
（２ － ２０） ： 10
 Port Number
Set the port number for when the terminal communicates with the
server via the network. You can specify a value between 1 and
65535. The default value is 7332.
Ｐｏｒｔ Ｎｕｍｂｅｒ
： ７３３２
If the server communication cycle is too short, it may cause
too much communication burden on the networking. If it is
too long, the real-time monitoring system may not work well.
So set the value properly for your environment.