User's Manual

- 62 -
includes fingerprint authentication, you must input your
fingerprint. You should do it twice. After the first input, take your
finger off, and then input the fingerprint again.
Place the fingerprint on the sensor.
Ｐｌａｃｅ ＦＰ １
If the following screen appears after the first fingerprint input,
take your finger off from the sensor.
Ｒｅｍｏｖｅ ＦＰ
Place the same fingerprint again.
Ｐｌａｃｅ ＦＰ ２
If the fingerprint input is successful, a success message will
appear. If it fails, a failure message will appear and you will
return to the initial registration screen.