User Manual

- 15
- 
• Group authentication
For group authentication, you can specify a group ID of 1 – 4 digits
long for each user group. You will enter a group ID and a
fingerprint for authentication. For example, you can use the unit
number for public housing like an apartment as a group ID. You
can specify a group ID when you register a user. Unlike other
methods, you must enter the group ID, and then press F1
before entering the fingerprint
to perform group authentication.
 Password authentication
A password of 4 – 8 digits long is used to validate access
authentication. You can use this method in such a special case as
when the fingerprints are damaged.
 RF card authentication (optional)
The RF card of a user is used to identify the user. You can register
the RF card number to the system in advance to provide against
loss or theft of the RF card.