User Manual

- 22 -

Security Level
Specify security level if you use fingerprint authentication. You can
choose a level between 1 and 9. The greater the number is, the
higher the security level is. You can specify security levels for 1:1
mode and 1:N mode separately to use the system more efficiently.
In general, set the 1:N mode security level higher than the 1:1
mode one.
• 1:1 mode
In this mode, you should input ID first and then your fingerprint.
The enrolled fingerprint corresponding to the ID will be compared
to the entered fingerprint on a 1:1 basis. So you can set lower
security level in this mode than in 1:N mode without degrading
security.
Ｓｅｃｕ． Ｌｅｖｅｌ
１．１：１ Ｍｏｄｅ
（１ － ９）: ５
If a high level of security is required, you will need to specif
y
a high security level. But a high security level can increase
the false rejection rate (fail to authenticate the right person)
depending on the status of the fingerprint. In contrast, a low
security level may increase the false acceptance rate (allo
w
authentication for the wron
g
p
erson
)
.