User Manual

- 23
- 
• 1:N mode
In this mode, you need to input fingerprint only without ID. It is
recommended to set a higher security level in this mode than in
1:1 mode. The default is 8.
Ｓｅｃｕ． Ｌｅｖｅｌ
２．１：Ｎ Ｍｏｄｅ
（１ － ９）: ８
In the 1:N mode, if you set the security level too low, the
false acceptance rate may increase, resulted in degrading
security. On the other hand, if you set it too high, the false
rejection rate may increase, resulted in inconvenience.