User Manual

- 32 -
 Wiegand
Decide whether to use wiegand protocol for transmission
authentication result and user ID to sever.
Ｗｉｅｇａｎｄ
ＯＦＦ/２６ｂｉｔ／３４ｂｉｔ
 Function Mode
Set the function keys of the keypad (F1 ~ F4) either for access
control (AC) or for time & attendance (T&A). If you choose 『AC』,
F1 will be used for group authentication. If you choose 『T&A』,
function keys from F1 to F4 will be used for time & attendance -
arriving, leaving, going out for outside duty and coming back from
outside duty (inter-operating with the time & attendance software is
required). Move to the value you want to choose with the direction
keys and press the Enter key.
Ｆｕｎｃｔｉｏｎ Ｍｏｄｅ
ＡＣ ／ Ｔ＆Ａ
Wiegand communication works only if the length of user ID
is 4 digit.