User Manual

- 38 -
 TCP/IP
Set TCP/IP of the terminal.
① DHCP
You can decide whether to use DHCP that automatically assigns
IP addresses to network clients. If you choose to use DHCP by
selecting 『ON』, you can skip step ② and ③.
ＴＣＰ／ＩＰ
１．ＤＨＣＰ
ＯＮ ／ ＯＦＦ
② Terminal IP
An IP address consists of 4 numbers and each of the number
has 3 digits. Entering all 3 digits for a number will move the
cursor to the next field so that you can start to enter the next
number. But you should press the Enter key to move to the next
field if a number has less than 3 digits.
２．Ｔｅｒｍｉｎａｌ ＩＰ
＿＿０． ０． ０． ０．