User Manual

- 50 -
Place the fingerprint on the sensor.
Ｐｌａｃｅ Ｙｏｕｒ ＦＰ
If the following screen appears after the first fingerprint input,
take your finger off from the sensor.
Ｒｅｍｏｖｅ ＦＰ
Place the same fingerprint again.
Ｐｌａｃｅ ＦＰ ａｇａｉｎ
If the fingerprint input is successful, a success message will
appear. If it fails, a failure message will appear and you will
return to the initial registration screen.