User's Manual

Network Mode

In network mode, terminals can be conveniently and efficiently

managed through TCP/IP communication with the server. In

network mode, user authentication and DB management are done by

the server while user registration and door control are done by the

terminal.

To use network mode, install a management program (Access

Manager Professional, Remote Manager) in the server/client system.

If there is a user on the terminal, network mode cannot be used.

Before switching to network mode, all registered users on the

terminal should be deleted.

General Setting

1. To use network mode, select

“Network” -> “General”, and

change “Do not use” into “Wired.”

2. The “Encryption” field shows

whether the data exchanged

between terminal servers are

encrypted.

3. “Ping Time” checks

communication between terminal

servers. The default value is 10

seconds, it can be set from 2 to

20 seconds. PING tests are

conducted at predetermined

times.

4. After completing network