User's Manual

Fingerprint Sensor Setting

Settings related to fingerprint sensor options such as security level,

fingerprint capture time, capture mode, LFD precision, and sensor

brightness can be configured.

Sensor Option

If the fingerprint is too bright or dark, the brightness, contrast, and

gain can be adjusted. In 1:N mode, the terminal’s basic sensor

settings will be applied even though individual sensor options were

set during user registration.

Select the “Brightness”, “Contrast”, or “Gain” tab, and select the

value by moving your finger on the slider.

Authentication Security Level

The security level is set according to the authentication method. The

security level for 1:1 authentication is between 1 and 9, and the

default is 5. The security level for 1:N authentication is between 5

and 9, and the default is 8. If the security level is too high,

authentication failure rate may rise, and if it security level is too low,

the misreading rate may rise. Therefore, the default level should be

used. This level applies to all users except those who chose different

security levels when registering.

2.FP Option 1. Brightness

2.FP Option 2. Secu. Level