User's Manual

Wiegand (Wiegand out configuration) Menu
When authentication success occurs, terminal transmits data through
wiegand lines according to the configuration of this menu.
The “Type” field defines the usage of wiegand out lines. When
enabled, 26-bit and 34-bit formats are supported.
The “Send Data” field selects which information is send between
user ID and card ID.
User ID
- 26bit Wiegand: E.Parity(1bit)+Facility Code(8bit)+User ID(16bit)+O.Parity(1bit)
- 34bit Wiegand: E.Parity(1bit)+Facility Code(16bit)+User ID(16bit)+O.Parity(1bit)
Card Number
- 26bit Wiegand: E.Parity(1bit)+Card Data(24bit)+O.Parity(1bit)
- 34bit Wiegand: E.Parity(1bit)+Card Data(32bit)+O.Parity(1bit)