User's Guide

eNBioAccess-T2 User Guide 31
12F, Daemyung Valeon bldg., 127, Beobwon-ro,
Songpa-gu, Seoul, Korea (05836)
Tel : [phone] , Fax : [phone],
E-Mail :[e-mail] http://www.nitgen.com
3.4.3. Set in terminal
In order to connect the terminal to the server, set to the network mode and set the
information.
Move to MENU > NETWORK > USE > TERMINAL and check whether lower information is
correct or not. If you have not changed the device network information, it is displayed as
follows.
In order to access the server
Move to MENU > NETWORK > USE > SERVER and check the lower information correctly
sets or not. If you do not change the server network information, it is displayed as follows.
3.4.4. LAN connection in terminal
At first, you can see the unregistered state because the terminal is not registered.