User's Guide

eNBioAccess-T2 User Guide 41
12F, Daemyung Valeon bldg., 127, Beobwon-ro,
Songpa-gu, Seoul, Korea (05836)
Tel : [phone] , Fax : [phone],
E-Mail :[e-mail] http://www.nitgen.com
3.6.2.3. INPUT FP
Input the same fingerprint twice when you check the Fingerprint as authentication type. If
you want to add only one fingerprint, select 1. NO. If you input the fingerprint second times
and they are normal, INPUT OK is displayed. If you want to add more fingerprints, select 2.
YES. One user can register 20 people for maximum.
3.6.2.4. INPUT CARD
When you check Card as AUTH TYPE, you will follow steps as below. If you input CARD on
Waiting state, registration completes and INPUT OK screen is displayed.
EM CARD ex) Card No.(5byte): 08h 01h 16h 1Dh D6h
Card Format
Card No.
Display Method
Standard
02207638
(16001DD6)
(3+5)digits Decimal
[022(16h)+07638(1DD6h)]
SC CARD ex) Card No.(4byte): 52h 9Dh 06h E3h
Card Format
Card No.
Display Method
Standard
529D06E3
8digits Hex
3.6.3. AUTO ADD
AUTO ADD is used when you want to register general users (not admin user) consecutively
with card or fingerprint.
If you select FP, it adds users by increasing ID consecutively only with fingerprint.
If you select CARD, it adds users by increasing ID consecutively only with card.