User's Guide

eNBioAccess-T2 User Guide 46

12F, Daemyung Valeon bldg., 127, Beobwon-ro,

Songpa-gu, Seoul, Korea (05836)

Tel : 02-6488-3232 , Fax : 02-6488-3099,

E-Mail :customer@nitgen.com http://www.nitgen.com

3.7.4. Terminal

It is used when setting the network information in the terminal.

Network setting in the terminal can be set in Static IP and DHCP.

STATIC: Set the value as a user wants.

DHCP: Allocated flexibly. (It can be operated normally when using the router supporting

DHCP.)

If STATIC is used, it is used when setting IP, Subnet mark and Gateway address of the

terminal.

The following is the default setting value.