User's Guide

eNBioAccess-T9 user guide 41
NITGEN Co,. Ltd / #1208 ,641-4, Munjeong-dong, Songpa-gu, Seoul, Korea (138-050)
Tel: [phone], Fax: [phone], E-Mail: [e-mail]
▶ Default setting: same with the setting in the left
screen
Select [Static IP] if IP is fixed in the connected
network is allocated. Select [DHCP] if there is a
DHCP server at the connected network and IP is
allocated from it.
In case of setting it to [Static IP], set terminal IP
address, subnet mask and gateway.
If [DHCP] is selected, no need to set it.
DNS can be input in [Server IP address] instead of
IP. In case of using specific DNS server, input IP
address of [DNS server] too. Up to 2 DNS servers
can be designated. To input DNS, check at DN□ to
input English.
▶ [Port]: default port value of the authentication server (AccessServer server) is „7332‟.
In case of changing the value, the value must be changed to the same value at the
server program as well. Hence, care is necessary to change it.
▶ [Terminal ID]: unique ID used to distinction of terminal by authentication server,
and default value is „1‟. It must match with the ID of terminal registered by the server
program. Up to 2000 ID can be input.
Touch a desired item to be changed to display
keypad.
After completing input for the relevant item using the
keypad, touch [ ] button or the next input window
to continue input. After completing input, touch not
input window but background to close the keypad.
Press [OK] button to apply the changed value after
setting. To cancel it, press [BACK] button to move to
upper menu.
3.5. Operation mode
3.5.1. Operation mode