User's Guide

eNBioAccess-T9 user guide 47
NITGEN Co,. Ltd / #1208 ,641-4, Munjeong-dong, Songpa-gu, Seoul, Korea (138-050)
Tel: [phone], Fax: [phone], E-Mail: [e-mail]
To delete all users, press [Delete all users] button.
To reset the setting value, press [Delete setting]
button. To reset authentication record, press [Delete
Log] button. To delete only image log, press [Delete
image log] button. To delete the whole data to make
the device to factory setting status, press [Factory
Init] button.
Press [Close] or [BACK] button to move to upper
menu.
3.6.6.1. Deleting all users
Select [System]  [Database]  [Delete all users] in the main menu to display the
screen below.
To delete all users, press [Yes] button, or press [No]
or [ ] button to cancel it.
If nothing is input for 5 seconds in this status,
message box will be closed without delete.
The following success message box will be displayed when all users are successfully
deleted by pressing [Yes].
<Figure3-5>
In this case, all of users and administrators will be deleted. They can’t be recovered
after deleting.