User's Guide

eNBioAccess-T9 user guide 57
NITGEN Co,. Ltd / #1208 ,641-4, Munjeong-dong, Songpa-gu, Seoul, Korea (138-050)
Tel: [phone], Fax: [phone], E-Mail: [e-mail]
Select [Display]  [Option] in the main menu to display the screen below.
▶ Default setting: same with the setting in the left
screen
▶ Screen saver (5 seconds ~ 10 minutes)
If nothing is input for the setting time, the screen
will be automatically OFF. However, LCD will be
always ON if it is set to „None‟.
▶ Display option
This is to set detail to be displayed when
authentication is successful.
- None: display only authentication result of
[Successful/Failed]
- User ID
- User name: If user name is not registered, user
ID will be displayed (In this case, add “ID:” to distinct
it from name)
- Social No.
To apply the setting value, press [OK] button or press [BACK] button to cancel and to
move to the upper menu.
3.8.5. Message time setting
Select [Display]  [Message display time] in the main menu to display the screen
below.
▶ Default setting: same with the setting in the left
screen
▶ Message display (ms)
This is to set time to be displayed in authentication
result window.
Up to 0~5000 can be set. Authentication result
window will be displayed for the setting time and
then it will be closed. Since it is by ms unit, input
2000 to set it to 2 seconds.
To apply the setting value, press [OK] button or press [BACK] button to cancel and to
move to the upper menu.