User's Guide

eNBioAccess-T9 user guide 6
NITGEN Co,. Ltd / #1208 ,641-4, Munjeong-dong, Songpa-gu, Seoul, Korea (138-050)
Tel: [phone], Fax: [phone], E-Mail: [e-mail]
1. Checking before use
1.1. Safety precautions
 Warning
Do not operate the device
with a wet hand. Do not
allow liquid such as water
into the device
.
-> It can cause failure,
electric shock.
Do not device heat
source near the device.
-> It can cause fire.
Do not randomly
disassemble, repair or
remodel.
-> It can cause failure,
electric shock or fire.
Keep children away from
the device. -> It can
cause children‟s safety
accident or failure.
- Failing to observe the precautions mentioned above can cause user death or serious injury.
 Caution
Do not install the device in
place exposed to direct rays
of the sun.
-> It can cause
malfunction, deformation
and/or discolor.
Do not install the device
in a place where with
much moisture or dust.
-> It can cause failure.
Do not wash the device by
directly splay water and do
not clean it with benzene,
thinner or alcohol.
-> It can cause electric
shock or fire.
Do not allow magnetics
near the device.
-> It can cause failure
and/or malfunction.
Do not make fingerprint
input part dirty.
-> Correct fingerprint
recognition won‟t be
possible.
Do not spray insecticide
or flammable spray on
the device.
-> It can cause
deformation and discolor.
Do not allow impact on the
device or contact with
sharp object.
-> It can cause failure due
to product damage.
Do not install the device
in a place where
temperature severely
changes.
-> It can cause failure.
- Failing to observe the precautions mentioned above can cause user injury or property damage.
※ Nitgen does not take any responsibilities for any accident, damage and/or loss caused
by not observing the details in the user manual.