CafeRomatica NICR7.. Fully automatic coffee centre Operating Instructions and Useful Tips GB A passion for coffee.
1 G F M J / K A B L D C E P O S H N R 2 GB T Q U A Display screen B Left rotary knob C Right rotary knob D Bean symbol on left rotary knob E Height-adjustable coffee spout F Cover of water container G Lid of bean holder (inside machine) H On / Off switch J Cup stand K Cup pre-warming function (Model 767) L Service hatch M Lid of coffee powder chute N Drip tray O Used coffee tray (inside machine) P Cover plate Q Castors (Model 767 rear side) R Frothing device - c
2 3 4 5 6 7 8 9 10 Dear Customer Congratulations on your purchase and thank you for choosing a quality NIVONA product. To get the most out of your NIVONA machine, please read this manual carefully before use and please follow the safety instructions before using the machine for the first time. Please keep this manual in a safe place. You may want to use it as a reference guide or hand it on to any future users of your machine.
Contents 1. SAFETY INSTRUCTIONS .....................................................................................................43 2. GETTING STARTED ............................................................................................................44 2.1 Preparation ..................................................................................................................44 2.2 Controls ....................................................................................................
1. Safety instructions / 2.
2. Getting started - - - - - Foam - Temperature - Exit Recipe Latte Macchiato - Start live Prog. - Aroma - Coffee - Milk - Foam - Temperature - Exit Recipe Milk - Start live Prog. - Milk - Foam - Exit Recipe My coffee (Model 767) - Espresso, cappuccino, … - Start live Prog. - Aroma - Coffee - Milk (display depends on selected drink) - Foam (display depends on selected drink) - Temperature - Exit Recipe Water - Start live Prog.
2. Getting started £ Setting the machine for filter or non-filter operation Using the machine with a filter A Claris filter is delivered with your machine. Filters reduce water hardness, so you will need to descale your machine less often if you use a filter. Your machine has been pre-set for non-filter operation (“Filter No”). £ Turn the Right rotary knob to “Filter Yes”. This tells the machine that the filter is now in use. £ Now press the Right rotary knob.
3. Selecting / altering the basic settings 2.6 Cup pre-warming function (Model 767) The “Setting Filter” message will appear on the display. Your machine is fitted with a cup pre-warming function. Prior to preparing your coffee, place your cup on the stand provided (Fig 1/J). The machine needs to be turned on for the cup pre-warming facility. The heat generated is lower in eco-mode. £ Turn the Right rotary knob to “Setting Exit”. Now press the Right rotary knob. 3.
3. Selecting / altering the basic settings £ Now press the Right rotary knob. The machine’s current temperature setting will flash intermittently on the display screen. £ Turn the Right rotary knob to select the required temperature setting. Now press the Right rotary knob. £ Turn the Right rotary knob to “Temperature Exit”. Now press the Right rotary knob. The “Setting Temperature” message will appear on the display. £ Turn the Right rotary knob to “Setting Exit”. Now press the Right rotary knob.
4. Preparing speciality coffees 4. Preparing speciality coffees Your NIVONA machine offers a wide range of options for making speciality coffees to suit individual tastes. However, most of the basic functions and controls are common to all the various speciality coffees: t The turn / press selector knob on the left-hand side (Left rotary knob for short) (Fig 1/B): the Left rotary knob is used to control the strength and amount of your coffee.
4. Preparing speciality coffees £ Selecting the aroma Your Coffee can be prepared in one of two ways: £ Turn the Right rotary knob to “Aroma”. Now press the Right rotary knob. £ Turn the Right rotary knob to set the aroma of your choice (to the left weaker, to the right stronger). £ Press the Right rotary knob to confirm your setting. 1. You can select the standard settings from the “Recipe” menu. These are your machine’s factory settings. However, you can change these settings, as described below.
4. Preparing speciality coffees £ Selecting the temperature (where the “Setting Temperature” menu has been set to “Individual”, see Point 3.3) £ Turn the Right rotary knob to “Temperature”. Now press the Right rotary knob. £ Turn the Right rotary knob to the temperature of your choice (Normal, High, Maximum). Press the Right rotary knob to confirm your setting. £ In order to get out of a menu, turn the Right rotary knob to “Exit”. Now press the Right rotary knob.
4. Preparing speciality coffees 4. Preparing speciality coffees £ Selecting the amount of froth £ Turn the Right rotary knob to “Foam”. Now press the Right rotary knob. £ Turn the Right rotary knob to the amount required (between 20 and 240 ml). Press the Right rotary knob to confirm your setting. Important note: Check the size of your cups. £ Selecting the temperature (where the “Setting Temperature” menu has been set to “Individual”, see Point 3.3) £ Turn the Right rotary knob to “Temperature”.
4. Preparing speciality coffees 4. Preparing speciality coffees £ Turn the Right rotary knob to “Recipe Latte Macchiato”. Now press the Right rotary knob. Note: If you began preparation too early, or have made a selection error, you can still change some of the parameters whilst your drink is being prepared. These parameters are shown on the bottom row of the display. Whilst they are flashing, you still have time to alter them. £ Selecting the aroma £ Turn the Right rotary knob to “Aroma”.
4. Preparing speciality coffees Your machine now begins preparing the froth. 4.6 Prepare “My coffee” (only Model 767) The “Stop foam?” message appears on the display. You can use your machine to make coffee completely according to your own preferences, independently of all other standard settings. £ Press the Right rotary knob when the correct amount of froth has been prepared. The standard setting for your warm milk has now been altered and saved.
4. Preparing speciality coffees £ Turn the Right rotary knob to “My coffee” £ Now press the left rotary knob. For a short time, the drink saved under “My coffee” and the settings saved for this will appear in the settings. Note: You can only change the following settings while the drink saved under “My coffee” and the settings saved for this drink are displayed. After a short time, the display will switch back to “My coffee“. Then push the left knob again if required.
5. Care and maintenance 5. Care and maintenance £ Turn the Right rotary knob to “Care”. Now press the Right rotary knob. £ Turn the Right rotary knob to “Care Rinse”. Now press the Right rotary knob. £ Turn the Right rotary knob to “Rinse frother”. Now press the Right rotary knob. The messages “Hose to spout” and “and into drip tray” will toggle alternately on your display. £ £ £ £ Once the rinsing cycle is complete, the heating cycle will begin and your machine is once again ready for operation. 5.
5. Care and maintenance £ Remove the drip and used coffee trays (Figs 1/N and 1/O) and empty them. £ Replace the drip and used coffee trays. The “Remove tank” message will appear on the display. £ Remove the water container and carefully take out the filter using the tool on the end of the measuring spoon (Fig 4). £ Refill the water container to the 0.5 l marker with fresh water. £ Add the descaling agent and replace the water container.
5. Care and maintenance / 6. System messages 7. Troubleshooting £ Fill the container with fresh water to the “maximum” level marker and put it back into the machine. £ Place a sufficiently large vessel (with a capacity of at least 0.5 litres) under the spout (Fig 1/E) and then press the Right rotary knob. The machine will now rinse the system. The “Filter is rinsed” message now appears on the display. 7.
8. Replacement parts and accessories / 9. Customer service, warranty, ... 8. Replacement parts and accessories Freshwater filter NIRF 700: New freshwater filters can be purchased from any well-stocked specialist retailer or can be ordered from our central Customer Services Department. Cleaning tablets NIRT 700: Supplies of cleaning tablets can be purchased from any well-stocked specialist retailer or can be ordered from our central Customer Services Department.
