User's Manual

ILD-IN’O User Guide
All Rights Reserved nke Watteco® ILD-IN’O User Guide
Page 8 of 9
Applicative payload is: 1106000f0004022300000e1000000005
6.2 CONFIGURE A STANDARD REPORT ON THE CONNECTOR INPUT 6+/6-
Specification: Report the counter all the 1 pulse on the connector Input 6+/6-. The counter has to be
reported at less each 10 minutes, and a minimal timing of 10 seconds between 2 reports has to be setted to
optimize the consumption.
Solution: A counter on Input 6+/6- is the End Point 5, Cluster “Binary Input” is 0x000F, Attribut “Count”
is 0x0402. The maximum field has to be 0x800A to have a report all 10 minutes and the minimum field has to
be 0x000A to have a minimal timing between two reports. The delta has to be configured to 0x01 for a report
all the 1 pulses.
Applicative payload is: b106000f00040223000a800a0000000a
6.3 CONFIGURE A BATCH REPORT ON THE CONNECTOR INPUT 6+/6 AND THE CONNECTOR
INPUT 3+/3-
Specification: Timestamp and record the Input 6+/6- all the 100 pulses; and timestamp and record the level
of the Input 3+/3-. A report has to be sent at least all 24 hours.
Solution: A counter on Input 6+/6- is the End Point 5, Cluster “Binary Input” is 0x000F, Attribut “Count”
is 0x0402. A level on Input 3+/3- is End Point 2, Cluster “Binary Input” is 0x000F, Attribut “Present Value” is
0x0055. There are two different values to record in the batch, so the tag size has to be 2. Label 0 can be used
for counter, and Label 1 for level. For counter, the delta is 100 and resolution 1. For level, the delta is 1 and the
resolution 1. The maximum has to be configured for all to 0x87F8.
It is necessary to send two frames to configure this batch.
Applicative payloads are:
b106000f1d040200000087f8000000640000000102005500000087f801010a (Count)
9106000f11005500000087f801010a (Present Value)
6.4 TOGGLE THE OUTPUT 2+/2-
Specification: Toggle the output 2+/2-.
Solution: The output 2+/2- is the End Point 1, Cluster “ON/OFF” is 0x0006. It is necessary to use a
specific command 0x50 with payload 0x02 for the toggle.
Applicative payload is: 3150000602