Datasheet

ManualsBrandsNKK SWITCHES ManualsToggle & Rocker Switches25A Miniature Toggle Switch, , 125Vac

Series S

High Capacity Standard Size Toggles

www.nkk.com

A113

Indicators

AccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable

Toggles

Rockers

Touch

Tilt

GENERAL SPECIFICATIONS FOR S800s ~ S732

Electrical Capacity (Resistive & Inductive Load)

Power Level: Shown in the following tables

Other Ratings

Contact Resistance: 10 milliohms maximum

Insulation Resistance: 1,000 megohms minimum @ 500V DC

Dielectric Strength: 2,000V AC minimum for 1 minute minimum for S800s & S800Ds

3,000V AC minimum for 1 minute minimum for S732

Mechanical Life: 50,000 operations minimum

Electrical Life: 10,000 operations minimum for S800Ds

25,000 operations minimum for S800s & S732

Materials & Finishes

Toggle: Brass with nickel plating for S732

Brass with chrome plating for S800s & S800Ds

Bushing: Brass with chrome plating

Case: Phenolic resin for S732; melamine phenol for S800s

Case Cover: Steel with chromate plating over zinc plating

Movable Contactor Plate: Copper with silver plating

Movable & Stationary Contacts: Silver alloy capped on copper with silver plating

Common Terminals: Brass

Contact Terminals: Brass with silver or nickel plating

Environmental Data

Operating Temp Range: –10°C through +70°C (+14°F through +158°F)

Installation

Mounting Torque: 2.94Nm (26 lb•in) for double nut

Maximum Panel Thickness: Shown beneath panel cutout in switch dimension drawings

Standards & Certiﬁcations

UL: File No. E44145 - Recognized only when ordered with marking on switch.

Add “/U” or “/CUL” to end of part number to order UL recognized switch.

UL or cULus recognition designated beside part numbers on following pages.

See Supplement section to ﬁnd UL or cULus rating details.

CSA: File No. 023535_0_000 - Certiﬁed only when ordered with marking on switch.

Add “/C” to end of part number to order CSA certiﬁed switch.

CSA certiﬁcation designated beside part numbers on following pages.

See Supplement section to ﬁnd CSA rating details.

Summary of content (5 pages)

PAGE 1
A GENERAL SPECIFICATIONS FOR S800s ~ S732 Rockers Electrical Capacity (Resistive & Inductive Load) Pushbuttons Power Level: Shown in the following tables Other Ratings 10 milliohms maximum 1,000 megohms minimum @ 500V DC 2,000V AC minimum for 1 minute minimum for S800s & S800Ds 3,000V AC minimum for 1 minute minimum for S732 50,000 operations minimum 10,000 operations minimum for S800Ds 25,000 operations minimum for S800s & S732 Programmable Illuminated PB Contact Resistance: Insulation Resistance:
PAGE 2
A High Capacity Standard Size Toggles DOUBLE POLE WITH SCREW LUG * UL, cULus & CSA recognized only when ordered with marking on switch (see General Specs) Rockers Toggles Series S Down *Approvals Pole & Throw R C US Up Resistive Keyway AC 125V AC 250V DC 30V DC 125V 30A 30A 30A 1A Inductive Motor Load AC 125V AC 250V PF 0.6 PF 0.
PAGE 3
A DOUBLE POLE WITH SCREW LUG & FLATTED LEVER US DC 30V S821D DPST ON 2-3 5-6 NONE OFF S822D DPDT ON 2-3 5-6 NONE ON S823D DPDT ON 2-3 5-6 OFF — ON Inductive L/R = 3ms DC 48V DC 125V DC 250V DC 400V DC 24V DC 48V 4A (10A) 15A 10A DC 125V DC 250V 30A 30A 20A 15A 6A 3A 2-1 5-4 30A 30A 20A 15A 4A 15A 10A 6A 3A 2-1 5-4 30A 30A 15A 7.5A — 15A 10A 6A 3A ( ) capacity is due to wiring. Refer to instructions below.
PAGE 4
Programmable Illuminated PB Pushbuttons Rockers Toggles Series S A High Capacity Standard Size Toggles THREE POLE WITH SCREW LUG & FLATTED LEVER * UL, cULus & CSA recognized only when ordered with marking on switch (see General Specs) Down *Approvals Model R R C US Electrical Capacity Toggle Position/Connected Terminals Pole & Throw Center Resistive Up DC 30V Keyway Inductive L/R = 3ms DC 48V DC 125V DC 250V DC 24V DC 48V DC 125V DC 250V S831D 3PST ON 2-3 5-6 8-9 NONE OFF 30
PAGE 5
A DOUBLE POLE WITH SCREW LUG S732 –– –– DPDT ON 2-3 5-6 2 Throw & Schematics: (COM) NONE ON 2-1 5-4 Inductive AC 125V AC 250V DC 30V AC 125V PF 0.6 50A 30A 50A 25A 5 Note: Terminal numbers are on the switch DPDT 3 1 6 4 Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Keyway M4 x 10 M6 x 8 M12 P1 6 3 5 2 4 1 (17.0) Typ .669 (50.0) 1.969 (60.0) 2.362 Rotaries 32° (10.