Datasheet

www.nikkaiswitches.com • Nihon Kaiheiki • Phone [phone] • Fax [phone]
3-07
Accessories & Hardware
Materials & Finishes
Standard materials are shown in the descriptions
of accessories and hardware in this section Y. All of the
nickel and chrome platings are bright nishes. The codes
shown below should be used for ordering optional nishes
and materials. Contact the factory for availability of these
custom nishes and materials.
3 Black 7 Dull nickel
4 Bright chrome 8 Zinc plating
5 Satin chrome 9 Natural aluminum
6 Bright nickel
Hardware Threading
Many hardware pieces are available in both
metric and inch threading, and in such cases M
(metric) and H (inch) are noted in the descriptions.
The customer must select threading by placing an
M or H after the basic AT part number. If the
hardware is available only in metric or inch, no
code is used in the description; threading is
designated on the drawing.
Color Codes
A Black D Amber G Blue
B White E Yellow H Gray
C Red F Green J Clear