Datasheet

ManualsBrandsNKK ManualsSwitch Caps / ButtonsButton Red 8x7.6mm

Light Touch Miniature Pushbuttons Series EB

www.nikkaiswitches.com • Nihon Kaiheiki • Phone 81- 44-813-8008 • Fax 81-44-813-8038

3-07

Distinctive CharacteristicsDistinctive Characteristics

Power and logic level capabilities available to suit varying applications.

Bushing and snap-in mount versions available; snap-in models offer

many style and color choices to enhance front panel appearance.

Light touch actuation.

High torque bushing prevents rotation and separation from

metal frame during installation.

Stainless steel frame resists corrosion.

Case of heat resistant resin meets UL 94V-0 ammability

rating.

Higher insulating barriers protect against crossover in

double pole devices.

1,500V dielectric strength between contacts and case

is accomplished by clinching the frame away from the

terminals.

Epoxy sealed terminals prevent entry of solder ux and

other contaminants.

Actual Size

Summary of content (6 pages)

PAGE 1
Light Touch Miniature Pushbuttons Series EB Distinctive Characteristics Power and logic level capabilities available to suit varying applications. Bushing and snap-in mount versions available; snap-in models offer many style and color choices to enhance front panel appearance. Light touch actuation. High torque bushing prevents rotation and separation from metal frame during installation. Stainless steel frame resists corrosion. Case of heat resistant resin meets UL 94V-0 flammability rating.
PAGE 2
Light Touch Miniature Pushbuttons Series EB General Specifications Electrical Capacity (Resistive Load) Power Level (No code or P): Logic Level (code G or PG): 3A @ 125V AC for silver contacts 0.4VA maximum @ 28V AC/DC maximum for gold contacts (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section.
PAGE 3
Light Touch Miniature Pushbuttons Series EB TYPICAL SWITCH ORDERING EXAMPLE EB20 65 B POLES & CIRCUITS CAPS 11 SPDT ON (ON) B .315” (8.0mm) Dia. 65 SPDT ON ON C .394” (10.0mm) Dia. 61 DPDT ON (ON) 85 DPDT ON ON ( ) = Momentary F COLORS CONTACTS, RATINGS, & TERMINALS Silver Contacts; Solder Lug Terminals; 3A @ 125V AC A Black B White G Gold Contacts; Solder Lug Terminals 0.
PAGE 4
Series EB Light Touch Miniature Pushbuttons POLES & CIRCUITS Plunger Position ( ) = Momentary Normal Down Connected Terminals Normal Keyway Throw & Switch Schematics Down Note: Terminal numbers are not actually on the switch.
PAGE 5
Light Touch Miniature Pushbuttons Series EB CAPS & COLORS B AT443 .315” (8.0mm) Diameter Snap-on Cap C Cap Colors Available: A B AT442 .394” (10.0mm) Diameter Snap-on Cap Cap Colors Available: F Black White G C Red H E Yellow A Green (7.6) .299 Blue (8.0) Dia .315 Gray Cap Material: Polycarbonate Black F Green B White G Blue C Red H Gray E Yellow Finish: Glossy (8.0) .315 (10.0) Dia .
PAGE 6
Light Touch Miniature Pushbuttons Series EB HARDWARE Installation/Assembly Standard Hardware 2 AT513M Metric Hexagon Nuts 1 AT509 Internal Tooth Lockwasher Face Nut Lockwasher Optional Hardware AT513M Metric Hexagon Nut AT509 Lockwasher AT507M Metric Locking Ring Material: Brass with Nickel Plating Material: Steel with Zinc/Chromate Material: Steel with Zinc/Chromate Locking Ring (Optional) Lock Nut (6.0) Dia .236 M6 P0.75 Optional Hardware: AT507M Metric Locking Ring (8.0) .