Datasheet

ManualsBrandsNKK ManualsSlide SwitchesSlide Switch, On-On, Soldering Pins

Series CS

Miniature Power Rated Slides

www.nkk.com

H10

Indicators

AccessoriesSupplement

Tactiles

KeylocksRotaries

Pushbuttons

Illuminated PB

Slides

Programmable

Rockers

Touch Tilt

Toggles

Electrical Capacity (Resistive Load)

Power Level: 3A @ 125V AC or 2A @ 250V AC

Other Ratings

Contact Resistance: 10 milliohms maximum

Insulation Resistance: 1,000 megohms minimum @ 500V DC

Dielectric Strength: 1,000V AC minimum between contacts for 1 minute minimum;

1,500V AC minimum between contacts & case for 1 minute minimum

Mechanical Life: 50,000 operations minimum

Electrical Life: 20,000 operations minimum

Static Capability: Withstands 12 kilovolts ESD

Contact Timing: Nonshorting (break-before-make)

Total Travel: .087” (2.2mm)

Materials & Finishes

Actuator: Glass ﬁber reinforced polyamide

Cover & Case: Glass ﬁber reinforced polyamide (UL94V-0)

Movable Contacts: Copper with silver plating

Stationary Contacts: Silver capped copper with silver plating

Terminals: Copper with silver plating

Environmental Data

Operating Temp Range: –30°C through +85°C (–22°F through +185°F)

Humidity: 90 ~ 95% humidity for 240 hours @ 40°C (104°F)

Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range

& returning in 1 minute; 3 right angled directions for 2 hours

Shock: 50G (490m/s

) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)

Installation

Soldering Time & Temp: Wave Soldering: See Proﬁle A in Supplement section.

Manual Soldering: See Proﬁle B in Supplement section.

Cleaning: These devices are not process sealed. Hand clean locally using alcohol based solution.

Standards & Certifications

Flammability Standard: UL94V-0 cover & case

General Speciﬁcations

Summary of content (4 pages)

PAGE 1
Toggles Series CS Miniature Power Rated Slides Rockers General Specifications Electrical Capacity (Resistive Load) Pushbuttons Power Level: Programmable Illuminated PB Other Ratings 10 milliohms maximum 1,000 megohms minimum @ 500V DC 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts & case for 1 minute minimum 50,000 operations minimum 20,000 operations minimum Withstands 12 kilovolts ESD Nonshorting (break-before-make) .087” (2.
PAGE 2
Toggles Series CS Miniature Power Rated Slides Rockers Distinctive Characteristics Programmable Illuminated PB Pushbuttons High performance and high quality at a low price. Molded cover and case of high insulating material withstand 12 kilovolts of electrostatic discharge (ESD), providing antistatic feature. Epoxy sealed terminals to lock out flux, dust, and other contaminants.
PAGE 3
Series CS Toggles Miniature Power Rated Slides Rockers TYPICAL SWITCH ORDERING EXAMPLE 1 2 A N W 03 Pushbuttons CS Actuators Programmable Illuminated PB Poles 1 SPDT A Narrow for Single Pole 2 DPDT B Wide for Double Pole Circuits ON W Silver Rated 3A @ 125V AC Mounting NONE N ON Terminals 03 PCB Mount Straight PC Keylocks 2 Contact Material & Rating CS12ANW03 H Narrow Actuator Silver Contacts with 3-Amp Rating Tactiles Slides Rotaries DESCRIPTION FOR TYPICAL ORDERIN
PAGE 4
Series CS Toggles Miniature Power Rated Slides MOUNTING Panel Cutouts Rockers PCB Footprints (4.8) .189 1 (9.0) .354 (4.6) .181 Single Pole (4.7) Typ .185 5 1 (1.6) Dia Typ .063 Double Pole 6 2 (4.7) Typ .185 4 (1.6) Dia Typ .063 Single Pole Double Pole Programmable Illuminated PB 2 TYPICAL SWITCH DIMENSIONS Single Pole ON (4.7) Typ .185 (5.1) .201 (6.4) .252 1 (4.3) .169 (6.4) .252 (6.6) .260 (1.2) .047 Actuator shown in LEFT position CS12ANW03 Double Pole (0.