Datasheet

ManualsBrandsNKK ManualsSlide SwitchesSlide Switch 1CO ON-ON 4.7mm Bracket Mount

Series MS

Miniature Slides

www.nkk.com

H30

Indicators

AccessoriesSupplement

Tactiles

KeylocksRotaries

Pushbuttons

Illuminated PB

Slides

Programmable

Rockers

Touch Tilt

Toggles

Electrical Capacity (Resistive Load)

Power Level (silver): 6A @ 125V AC or 3A @ 250V AC

Logic Level (gold): 0.4VA maximum @ 28V AC/DC maximum

(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)

Logic/Power Level: Combines silver & gold ratings

(gold over silver)

Note: Find additional explanation of dual rating & operating range in Supplement section.

Other Ratings

Contact Resistance: 10 milliohms maximum for silver; 20 milliohms maximum for gold

Insulation Resistance: 1,000 megohms minimum @ 500V DC

Dielectric Strength: 1,000V AC minimum between contacts for 1 minute minimum;

1,500V AC minimum between contacts & case for 1 minute minimum

Mechanical Life: 100,000 operations minimum

Electrical Life: 25,000 operations minimum for silver; 50,000 operations minimum for gold

Contact Timing: Nonshorting (break-before-make)

Total Travel: On-None-On circuit .087” (2.2mm); all other circuits .138” (3.5mm)

Materials & Finishes

Actuator: Glass ﬁber reinforced PBT resin (UL94V-0)

Frame: Stainless steel for panel & PCB mount; phosphor bronze with tin plating for bracket mount

Dust Cover: Phosphor bronze with nickel plating

Case: Glass ﬁber reinforced diallyl phthalate resin (UL94V-0)

Movable Contacts: Silver alloy (code W); copper with gold plating (code G);

or silver alloy with gold plating (code A)

Stationary Contacts: Silver capped copper with silver plating (code W); copper with gold plating (code G);

or silver alloy with gold plating (code A)

Terminals: Copper or brass with silver or gold plating

Environmental Data

Operating Temp Range: –30°C through +85°C (–22°F through +185°F)

Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F)

Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning

in 1 minute; 3 right angled directions for 2 hours

Shock: 50G (490m/s

) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)

Processing

Soldering: Wave Soldering recommended (PC Mount). See Proﬁle A in Supplement section.

Manual Soldering: See Proﬁle A in Supplement section.

Cleaning: These devices are not process sealed. Hand clean locally using alcohol based solution.

Standards & Certifications

Flammability Standards: UL94V-0 rated actuator & case

UL: File No. E44145 - Recognized only when ordered with marking on switch.

Add “/U” or “/CUL” to end of part number to order UL recognized switch.

All Single & Double Pole Double Throw models recognized at 6A @ 125V AC & 3A @ 250V AC.

CSA: File No. 023535_0_000 - Certiﬁed only when ordered with marking on switch.

Add “/C” to end of part number to order CSA certiﬁed switch.

All Double Throw & 3 Throw models certiﬁed at 6A @ 125V AC, 3A @ 250V AC, &

0.4VA maximum @ 28V DC.

General Speciﬁcations

Summary of content (8 pages)

PAGE 1
Toggles Series MS Rockers General Specifications Electrical Capacity (Resistive Load) Programmable Illuminated PB Pushbuttons Power Level (silver): 6A @ 125V AC or 3A @ 250V AC Logic Level (gold): 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Logic/Power Level: Combines silver & gold ratings (gold over silver) Note: Find additional explanation of dual rating & operating range in Supplement section.
PAGE 2
Toggles Series MS Miniature Slides Rockers Distinctive Characteristics Pushbuttons Available in flat frame and bracketed PC mounting types. Programmable Illuminated PB Over-center actuator block and plunger design gives crisp actuation with clear indication of circuit status; this design also diminishes sparking and increases operating life. Guide interlocked with actuator block prevents window locking and maintains correct plunger alignment to assure contact stability.
PAGE 3
Series MS Toggles Miniature Slides TYPICAL SWITCH ORDERING EXAMPLE Pushbuttons Rockers MS 2 A S Programmable Illuminated PB 1 SPDT 2 DPDT SP3T Actuators Keylocks NONE ON ON OFF ON 0 ON ON ON Rotaries ON 3 H 30 A .150” (3.8mm) Wide for Single or Double Pole W Silver; Rated 6A @ 125V AC & 3A @ 250V AC B .323” (8.2mm) Wide for Double Pole G Gold; Rated 0.4VA max. @ 28V AC/DC max. A Gold over Silver; Rated 6A @ 125V AC & 0.4VA max. @ 28V AC/DC max.
PAGE 4
Series MS Toggles Miniature Slides POLES & CIRCUITS DP Right MS12 ON NONE ON MS13 ON OFF ON MS22 ON NONE ON MS23 ON OFF ON Left Center Right 2-1 OPEN 2-3 Note: Terminal numbers are not actually on the switch.
PAGE 5
Series MS Toggles Miniature Slides MOUNTING TYPES & TERMINALS Rockers F Pushbuttons (4.19) .165 Programmable Illuminated PB Straight PC Mount (Combines with Straight PC Terminal 03 only) (9.0) .354 SP or DP with .150” (3.8mm) Actuator Maximum Panel Thickness: .197” (5.0mm) S (17.53) .690 (17.53) .690 Dimension A = .268” (6.8mm) for on-none-on .319” (8.1mm) for on-off-on & on-on-on N A A DP only with .323” (8.
PAGE 6
Series MS Toggles Miniature Slides TYPICAL SWITCH DIMENSIONS (0.8) Typ .031 MS12ANG03 Actuator in LEFT Position Straight PC Terminals (1.17) Typ .046 2 4 1 (4.8) .189 (11.4) .449 (4.8) .189 (6.35) .250 5 1 4 (4.7) Typ .185 (1.8) Dia Typ .073 (0.5) .020 MS22BNG03 Actuator in LEFT Position (3.8) .150 (4.8) .189 Straight PC Terminals with Bracket (3.2) .126 (0.4) Typ .016 (1.2) Typ .047 ON (3.8) .150 (6.7) .264 (13.1) .516 (5.1) .201 (4.7) Typ .185 1 1 (0.36) .014 (5.6) .220 (7.
PAGE 7
Series MS Toggles Miniature Slides TYPICAL SWITCH DIMENSIONS Single Pole Rockers Right Angle PC Terminals (5.1) .201 (3.8) .150 (12.7) .500 1 Pushbuttons (3.8) .150 (5.7) .224 Programmable Illuminated PB MS12ASG30 (1.2) .047 (9.53) .375 (1.27) .050 (1.8) Dia Typ .073 (4.7) Typ .185 3 (6.6) .260 (3.2) (3.81) .126 .150 (0.4) Typ .016 (13.2) .520 2 3 2 (9.53) .375 (0.8) Typ .031 (4.7) Typ .185 (0.5) .020 Double Pole (3.8) .150 (5.1) .201 (3.8) .150 (12.7) .
PAGE 8
Notes www.nkk.