User's Manual

Battery parts
TOP: The battery end of the Battery Cable (4) Bottom: The main battery of the NL Camera
1: Output connector for the Battery Cable 2: Fuel gauge 3: Battery Charger connector
Charger
The Charger for the battery is an AC/DC converter with an output capable of charging LiFePO
4
chemistry batteries. The charger has a universal single phase mains input, a status led and a
charging output. The charger is provided with a mains power cable including a plug compatible for
your regional mains output. For charging the battery, the charger has a DC barrel plug at the end
of the output cord. Do not use any other chargers than Noiseless Acoustics approved chargers.
Getting started
Before every use make sure that all the parts are in good condition. Make sure that the contacts of
all the connectors are clean and dry. Due to supplier storage time and transportation regulations
the charge of the batteries are low. To ensure long life time of the batteries charge the batteries
fully before the first use.