User's Manual

1 greens, 2 red Over 20 %
2 red
Less than 20 % (recharge soon)
1 red
Less than 10 % (near self switch off)
No lights
Empty (recharge within 12 hours)
Nominally the battery yields 7-8 hours of usage. Though the battery usage depends on multiple
variables which may decrease the usage time. These are the cell temperatures, the load and the
age (cycles) of the battery.
Startup
The NL Camera will start automatically when the power supply is connected. The NL Camera will
shut down automatically when the battery is disconnected. If the battery is disconnected
accidentally and immediately reconnected to the NL Camera the unit will reboot. When shutting the
device down, it is recommended to wait until the power LED is off before connecting the battery
power supply again.
1. Attach the Battery Cable to the battery. The connector of the Battery Cable can be attached
to the battery output connector only one way. Push the connector downwards all the way.
2. Attach the connector to the NL Camera according the following instructions, with the
orientation markings facing the same way: