Users Manual

12
7.3.4. Flash Operation
I. Backup / Restore
From the top menu navigate to SystemBackup / Flash Firmware
A. Download Backup
1. Click Generate archive
2. The backup file (.gz) will download automatically
B. Reset to defaults
1. Click Perform reset
2. The device will reboot, which may take a few minutes
C. Restore Backup
1. Click Choose file
2. Find and select the file from your PC or Laptop (the file must
be a tar file with the .gz extension)
3. Click open
4. Click Upload archive
Note: Do not power off the AP during this operation
Warning: Configurations are specific to a Firmware level and only in some cases
they are back compatible. Ensure the backup is compatible with the Firmware of