Users Manual

7.5.3. Network Administration - Change IP Address

The factory default IP address of the Bolt is 192.168.1.1 /24. It should be changed

to an address that is compatible with the network’s IP schema. The following

instructions provide details to do this:

I. From the top menu navigate to NetworkLan Interface

II. Click Edit

III. Modify the IP address and other relevant details

Protocol: Chose between Static or DHCP (Static Recommended)

IPv4 address: Enter the IP address to be used for the Bolt

IPv4 netmask: Enter the network mask that is relevant for the network

IPv4 gateway: Gateway (Important for routing)

IPv4 broadcast: Auto-generated (no entry required)

Use custom DNS servers: At this time, this entry can be left blank

Warning: Entering the wrong information (ie incorrect IP address) can make the

device inaccessible. Double check your entries in these fields.