Manual

ools and Eools and E

ools and E

quipment Rquipment R

quipment R

equirequir

equir

eded

Different models and years of vehicle use different-sized fasteners, and every effort has been taken

to correctly identify the proper sized tool for each step of the installation. Occasionally, however,

manufacturers may use an alternate fastener, so it’s advisable to check that each tool correctly fits

the fastener before loosening or tightening it. The following tools and equipment will be needed:

16mm wrench or socket (1/2” drive suggested)

14mm wrench or socket (in some cases, 9/16” may be required)

14mm line wrench

11mm flare wrench

11mm box wrench (in addition, an 11mm flare wrench is also recommended)

1/2” socket (3/8” drive suggested)

T-50 Torx wrench or socket

T-25 Torx wrench

5mm Allen (hex) wrench

Torque wrenches capable of 10-85 lb-ft settings

Small drip tray or several rags

Small funnel or suitable means of filling master cylinder reservoir

Anti-seize compound

Brake bleed bottle

1 pair of jack stands or other means of supporting the vehicle

Plastic or non-marring mallet

DOT 3 or 4 Brake Fluid. Check manufacturer’s recommendation for compatibility. StopTech

recommends flushing brake fluid every one-to-two years, or more often under severe usage condi-

tions. If not done recently, the installation of a brake kit is an excellent opportunity to refresh your

brake fluid, or to upgrade to a higher-performance fluid, such as Motul 600.

ont Axle Kont Axle K

ont Axle K

it for theit for the

it for the

ini Cooper and Mini Cooper and M

ini Cooper and M

ini Cooper S (Contini Cooper S (Cont

ini Cooper S (Cont

’’

’

d.)d.)

d.)

3541 Unit A, Lomita Boulevard, Torrance, CA 90505 (310) 325-4799