Owner's manual

NM Engineering ∞ 3300 Corte Malpaso, Camarillo, CA 93012 ∞ 805.388.7171 ∞ 805.388.0030 FAX

engineer@nm-eng.com ∞ www.nm-eng.com

PARTS INCLUDED: TOOLS REQUIRED:

[1] Left Side Carbon Scuttle [1] Cleaning Solvent or Degreaser [1] Soft Towel

[2] Right Side Carbon Scuttle

1. Push Scuttle forward toward front of vehicle then pull

out.

2. Rotate bulb housing counter clockwise 90°, and then

pull out.

DOC. NM.668856 Rev. 11.09.11

3. Clean fender with cleaner where Scuttle will be

positioned.

4. Pull out bulb from Socket.

5. Turn on hazard blinkers then connect plugs to

check if functioning. If not blinking reverse plug

180°.

6. Peel off tape backing and lightly apply to vehicle

for correct positioning. Once aligned press firmly

to all four corners.

CARBON FIBER SCUTTLE – NM.958856

[R55] MINI Cooper Clubman All 2008-12

[R56] MINI Cooper Hardtop All 2007-12

[R57] MINI Cooper Convertible All 2009-12

PAGE 1
CARBON FIBER SCUTTLE – NM.958856 [R55] MINI Cooper Clubman All 2008-12 [R56] MINI Cooper Hardtop All 2007-12 [R57] MINI Cooper Convertible All 2009-12 PARTS INCLUDED: [1] Left Side Carbon Scuttle [2] Right Side Carbon Scuttle 1. 2. TOOLS REQUIRED: [1] Cleaning Solvent or Degreaser [1] Soft Towel 3. Clean fender with cleaner where Scuttle will be positioned. 4. Pull out bulb from Socket. 5. Turn on hazard blinkers then connect plugs to check if functioning. If not blinking reverse plug 180°. 6.