User Manual

Table Of Contents
Using the Keyboard and Mouse 33
Mouse Pairing Failed
If for some reason the Wizard does not launch, or the Wizard repeatedly fails to pair your mouse with the
computer:
1
Power on the mouse by sliding the switch on the bottom of the mouse to the
On
position.
2
Press the wireless (Bluetooth) connection button on the left side of the computer base to put the
computer into "discover" mode. The wireless (Bluetooth) light on the system will blink.
3
Press the wireless (Bluetooth) connection button on the bottom of the mouse to put the mouse into
"discover" mode. The blue wireless light on the mouse will blink, and the connection will be made to
pair the computer with the mouse. The total time to complete mouse pairing is less than 20 seconds.
After completing the pairing, the blue wireless light on the mouse will stop blinking and continue to
light for 2 to 3 seconds, and then go out.
Numeric Keypad
The numeric keypad functions like the numeric keypad on an external keyboard. Each key on the keypad
has multiple functions.
To enable the keypad, press <Num Lk>. The light indicates that the keypad is active.
To disable the keypad, press <Num Lk> again.
1 numeric keypad
1
9