User Manual

Table Of Contents
36 Using the Keyboard and Mouse
To move the cursor, lightly slide your finger over the touch pad.
To select an object, lightly tap once on the surface of the touch pad or use your thumb to press the left
touch-pad button.
To select and move (or drag) an object, position the cursor on the object and tap twice on the touch
pad. On the second tap, leave your finger on the touch pad and move the selected object by sliding
your finger over the surface.
To double-click an object, position the cursor on the object and tap twice on the touch pad or use your
thumb to press the left touch-pad button twice.
The touch pad has scrolling capability in the scroll zone on the right side of the touch pad. Scrolling is
enabled by default. To disable this feature, modify the mouse properties through the Control Panel.
NOTE: The scroll zones may not work with all application programs. For the scroll zones to function properly, the
application program must be able to use the touch-pad scroll feature.
Customizing the Touch Pad and Mouse
You can use the Mouse Properties window to adjust settings for both the mouse and touch pad.
1
Open the Control Panel, click
Printers and Other Hardware
, and then click
Mouse
.
2
In the
Mouse Properties
window, clicking the adjustment settings for the mouse will also adjust the
touch pad settings.
3
Click
OK
to save the settings and close the window.
1 touch pad 2 scroll zone 3 touch pad buttons
1
2
3