User Manual
Table Of Contents
- Contents
- About Your Computer
- Using the Keyboard and Mouse
- Using Multimedia
- Using the Display
- Using a Battery
- Setting Up Your Computer
- Using Networks (LAN or Wireless)
- Using Cards
- Securing Your Computer
- Troubleshooting
- Dell Technical Update Service
- Dell Diagnostics
- Dell Support Utility
- Drive Problems
- E-Mail, Modem, and Internet Problems
- Error Messages
- IEEE 1394 Device Problems
- Keyboard Problems
- Lockups and Software Problems
- Memory Problems
- Mouse Problems
- Network Problems
- Media Memory Card or ExpressCard Problems
- Power Problems
- Printer Problems
- Scanner Problems
- Sound and Speaker Problems
- Touch Pad or Mouse Problems
- Video and Display Problems
- System Setup Program
- Traveling With Your Computer
- Reinstalling Software
- Adding and Replacing Parts
- Dell QuickSet
- Specifications
- Obtaining Assistance
- Appendix
- Glossary
- Index
52 Using the Display
3
Firmly close the lid so all four latches are engaged.
NOTICE: Ensure that all four latches are engaged securely before picking up the computer to move it or the
keyboard could fall and be damaged.
Adjusting the Display Panel
The display on your computer is adjustable, so you can find a viewing angle that is comfortable for you.
NOTICE: Do not position the display so that it blocks the DVD drive from opening completely.
Adjusting Brightness
When a Dell™ computer is running on battery power, you can conserve power by setting the brightness
to the lowest comfortable setting by pressing <Fn> and the up- or down-arrow key on the keyboard.
NOTE: Brightness key combinations only affect the display on your portable computer, not monitors or projectors
that you attach to your portable computer or docking device. If your computer is connected to an external monitor
and you try to change the brightness level, the Brightness Meter may appear, but the brightness level on the
external device does not change.
You can press the following keys to adjust display brightness:
• Press <Fn> and the up-arrow key to increase brightness on the integrated display only (not on an
external monitor).
• Press <Fn> and the down-arrow key to decrease brightness on the integrated display only (not on an
external monitor).