User Manual
Table Of Contents
- Contents
- About Your Computer
- Using the Keyboard and Mouse
- Using Multimedia
- Using the Display
- Using a Battery
- Setting Up Your Computer
- Using Networks (LAN or Wireless)
- Using Cards
- Securing Your Computer
- Troubleshooting
- Dell Technical Update Service
- Dell Diagnostics
- Dell Support Utility
- Drive Problems
- E-Mail, Modem, and Internet Problems
- Error Messages
- IEEE 1394 Device Problems
- Keyboard Problems
- Lockups and Software Problems
- Memory Problems
- Mouse Problems
- Network Problems
- Media Memory Card or ExpressCard Problems
- Power Problems
- Printer Problems
- Scanner Problems
- Sound and Speaker Problems
- Touch Pad or Mouse Problems
- Video and Display Problems
- System Setup Program
- Traveling With Your Computer
- Reinstalling Software
- Adding and Replacing Parts
- Dell QuickSet
- Specifications
- Obtaining Assistance
- Appendix
- Glossary
- Index
Setting Up Your Computer 71
Setting Up a Printer
NOTICE: Complete the operating system setup before you connect a printer to the computer.
See the documentation that came with the printer for setup information, including how to:
• Obtain and install updated drivers.
• Connect the printer to the computer.
• Load paper and install the toner or ink cartridge.
For technical assistance, refer to the printer owner's manual or contact the printer manufacturer.
Printer Cable
Your printer connects to your computer with a USB cable. Your printer may not come with a printer
cable, so if you purchase a cable separately, ensure that it is compatible with your printer and computer.
If you purchased a printer cable at the same time you purchased your computer, the cable may arrive in
the box in which your computer was shipped.
Connecting a USB Printer
NOTE: You can connect USB devices while the computer is turned on.
1
Complete the operating system setup if you have not already done so.
2
Attach the USB printer cable to the USB connectors on the computer and the printer. The USB
connectors fit only one way.