User's Manual

To Install the Keyboard:
• Turn off computer before installing the keyboard.
• Find the keyboard receptacle on the rear panel of the
computer. Usually, an icon can be seen to identify the
keyboard connector as shown below.
• Connect keyboard plug on keyboard cable to the proper
receptacle on the computer.
• Note: Never attempt to force the plug into the receptacle if it
does not fit!
To Angle the Keyboard:
• Use the fold-out tilt legs, located at the back left and right
corners on the underside of the keyboard. Pull the tabs
outward to full open position. Do not use excessive force
when doing so.
Tilt leg Back of Keyboard
Tilt leg
Underside of Keyboard
Front of Keyboard
Keyboard
Tilt leg