User manual

Technical Specifications
Model CH695TX
Dimensions Height 460 mm
Width 596 mm
Depth 315 mm
Light Max 2 x 10 W
Grease filter 1 (one)
Mains Voltage 230 V
(Electric) Safety class Class 1
Total nominal power 310 W
Installation
Unpacking
Check that the cooker hood has no damages.
Transportation damages should immediately be
reported to the company responsible for the
transportation.
Damages, faults and eventually missing details
should immediately be reported to the retailer.
Take care of the packing materials so that small
children cannot play with them.
Fitting
The hood is to be mounted on the wall.
When installed, the hood must be not less than 40 cm.
above electric burners or 65 cm. above gas or mixed-
fuel burners.
The hood can be installed above these heights but for
optimum performance it should be installed at the
distance quoted for the appropriate heat source.
Electrical connection (not for UK)
Safety warnings for the electrician
Before connecting the appliance to the power supply,
check that the voltage indicated on the rating plate
Min
65 cm
Min
40 cm
Mounting accessories included
Parts supplied with the hood:
 Installation template.
 Fastening bars: x 3
 Fastening screws: 7+2
 Allen spanner
 Cold air inlet.
 User manual.
 flange Ø125mm
corresponds to the mains power supply available.
Appliances fitted with a plug can be connected to
any standard power socket within easy access.
Should it be necessary to provide a fixed
connection, the hood must only be installed by an
electrician authorised by the local electricity board.
When installing, an omnipolar disconnector with a
distance of at least 3 mm between contacts must be
provided.
Fixed connection of the appliance must only be
carried out by an authorised electrician.
Fig. 7 - Fitting