Datasheet

ManualsBrandsNo Brand ManualsAdhesive Guns & AccessoriesMelt Insert

Page 1 of 5

Material Safety Data Sheet

Report No.: RTMS-TCO-001-100095EN

Date: 30/05/2011

Product details

.Trade name: Hot melt glue stick

.Application of the substance: Bond.

.Manufacturer/Supplier: Tian Tian Adhesive Factory of Jiande

.Tel: 86-571-64147176

.Fax: 86-571-64145948

.E-mail: -

.Information in case of emergency:

.Tel: +86-571-64147176

.Chemical characterization

.Description: The component of this product is in the form of element listed below with additions.

Components Number

CAS Number

Approximate(%)by Wt.Or Vol.

GHS Classification

EVA

24937-78-8

50~70%

Not classified

Petroleum resins

64742-16-1

5~42%

Not classified

Abietic resin

8050-26-8

0~30%

Not classified

Paraffin wax

8002-74-2

<5%

Not classified

.Potential Health Effects:

.Eye: The product is not classified as harmful by eye contact.

.Skin: The product is not classified as harmful by skin contact.

.Ingestion: The product is not classified as harmful by ingestion contact.

.Inhalation: The product is not classified as harmful by inhalation contact.

Persons using these products should consult a physician or other medical professional if an accident

involving these products in injury. Specific first-aid measures are as follows:

. Eye Contact: Rinse eyes with water. Remove any contact lenses, and continue flushing with plenty of water for several minutes.

Seek medical attention if irritation develops or persists.

.Skin Contact: Washing of exposed skin after use is recommended to reduce general chemical contact.

.Inhalation: Remove from area to fresh air. Seek medical attention if respiratory irritation develops or if breathing becomes

1 Identification of the substance/preparation and of the company/undertaking

2 Composition/information on ingredients

3. Hazards identification

4 First aid measures

Summary of content (5 pages)

PAGE 1
Material Safety Data Sheet Report No.: RTMS-TCO-001-100095EN Date: 30/05/2011 1 Identification of the substance/preparation and of the company/undertaking Product details .Trade name: Hot melt glue stick .Application of the substance: Bond. .Manufacturer/Supplier: Tian Tian Adhesive Factory of Jiande .Tel: 86-571-64147176 .Fax: 86-571-64145948 .E-mail: .Information in case of emergency: .Tel: +86-571-64147176 2 Composition/information on ingredients .Chemical characterization .
PAGE 2
difficult. .Ingestion: Never give anything by mouth to an unconscious person. Wash out mouth with water. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical aid. 5 Fire-fighting measures .Extinguishing Media: Use media suitable for the material that is burning. .Special Fire Fighting Procedures: Firefighters should wear NIOSH approved, positive-pressure self-contained breathing apparatus and full protective gear. .
PAGE 3
9. Physical and chemical properties .General Information Form: Color: Odor: Solid White None .Change in condition Melting point/Melting range: Boiling point/Boiling range: 160-180℃ .Flash point: Not available .Self-igniting: Not available .Danger of explosion: Not available .Vapour pressure： Not available Not available .Partition coefficient (n-octanol / water)： Not available .Density: .Relative density: .Vapor density: .Evaporation rate： Not available .
PAGE 4
12 Ecological information .Ecotoxical effects: Acute toxicity Time Species Method Evaluation Remarks LC50 N/A 96h Fish OECD 203 N/A N/A LC50 EC50 N/A N/A 48h 96h Daphnia Algae OECD 202 OECD 201 N/A N/A N/A N/A .Effect of material on plants or animals: Not available .Effect of material on plants or aquatic life: Not available .Ecological data: Not available 13 Disposal considerations .Waste Disposal Methods: Disposal recommendations based on material as supplied.
PAGE 5
16 Other information This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. .Emergency Telephone Number： .Department issuing MSDS: ※ Remark: This MSDS is prepared by REACHTEK who is a professional regulatory service provider. .Contact: +86-571-87206555 info@ cirs-group.com http://www.cirs-group.