Installation Guide

ManualsBrandsNo Drilling Required ManualsGrab BarsGB38030-W-NDR

GRIPP Grab Bar Installation, Warranty, Safety and Care Instruction Guide

GRIPP Grab Bar Installation, Warranty, Safety and Care Instruction GuideGRIPP Grab Bar Installation, Warranty, Safety and Care Instruction Guide

GRIPP Grab Bar Installation, Warranty, Safety and Care Instruction Guide

GB3200 (1

GB3200 (1GB3200 (1

GB3200 (1-

-1/4” diameter) and GB3800 Series (1

1/4” diameter) and GB3800 Series (11/4” diameter) and GB3800 Series (1

1/4” diameter) and GB3800 Series (1-

-1/2” diameter)

1/2” diameter) 1/2” diameter)

1/2” diameter)

Thank you for purchasing the

nie wieder bohren.

(German for “no drilling required.”) heavy duty grab bars.

nie wieder bohren.

Germany is an innovation leader in fastening technology. These bars have been engineered to exceed ASTM (American Society for

Testing and Materials) requirements and offer the ability to mount using the internationally patented

nie wieder bohren.

- no

drilling required. -technology on premium surfaces such as tile, stone, glass and metal. The

nie wieder bohren.

– no drilling

required. -adapter system allows for ease of installation, durability, performance and no holes in the walls! Another advantage of

this innovative approach on fastening technology is that the system can be removed, if needed, with no damage to the surface.

Moreover, with an additional set of adapters, the bar can be re-installed in minutes anywhere you like as long as the surface is

suitable for the

nie wieder bohren.

– no drilling required. -system.

Choosing and Positioning a Wall Mounted Grab Bar

Choosing and Positioning a Wall Mounted Grab BarChoosing and Positioning a Wall Mounted Grab Bar

Choosing and Positioning a Wall Mounted Grab Bar

Wall mounted grab bars come in several lengths. Deciding which length to install depends on how the grab bar will be used. If you

are planning to put a main grab bar on the side wall of a bathroom tub enclosure, the National Kitchen and Bath Association

recommends using a grab bar of at least 24 inches. If you also want to add a second grab bar for further support on the shower

head wall, it should be at least 12 inches long. Before deciding whether to install a grab bar horizontally, diagonally or vertically

the following needs to be taken into consideration: Horizontal grab bars offer better leverage to a person getting up from the

bathtub or up and down from a toilet, whereas a grab bar placed at a 45 degree angle to the toilet or bathtub rim is easier for

people of differing heights to reach. Horizontal grab bars should be located 33 to 36 inches above the finished floor around toilets,

33 to 36 inches above the floor of the bathtub and close enough to the shower head wall in order to support a person adjusting

water temperature. Vertical mount is ideally wall mounted on the entrance to the tub and directly under the shower head to assist

with safe entry and to prevent from falling while showering. The

nie wieder bohren.

grab bars are also ideal to mount directly to

the tub edge to aid children in safe entry and exit from the bathtub.

Summary of content (6 pages)

PAGE 1
GRIPP Grab Bar Installation, Warranty, Safety and Care Instruction Guide GB3200 (1(1-1/4” diameter) and GB3800 Series (1(1-1/2” diameter) Thank you for purchasing the nie wieder bohren. (German for “no drilling required.”) heavy duty grab bars. nie wieder bohren. Germany is an innovation leader in fastening technology. These bars have been engineered to exceed ASTM (American Society for Testing and Materials) requirements and offer the ability to mount using the internationally patented nie wieder bohren.
PAGE 2
Mounting: nie wieder bohren. required. technology mounting system: (recommended (recommended for Tile, Natural Stone, bohren. - no drilling required. Concrete, Glass & Metal Components: -Grab bar -GB00002-NDR (mounting kit) Tools required: -Level -Clean dry cloth Note: Failure to follow the instruction sheet completely may result in a product failure and will void the warranty. Please be sure to carefully read and follow the instructions for optimum results and safety. 1.
PAGE 3
10. Put tube into the center hole of the adapter and very slowly turn the tube key to insert the adhesive. Continue to insert until the adhesive beads up from each of the three vent holes. Do not disturb or apply pressure on the adpater after inserting the adhesive for 24 hours ! (See pics. 11, 12 and 13) Should 11 12 13 adhesive tube be empty before it beads up from each vent hole, please open another tube and continue insertion as described.
PAGE 4
Option 2 1. You can also remove the adapters without adjustable pliers by taking advantage of the leverage effect of the grb bar itself. The first step is to unscrew one end of the grab bar (see pic. 21). 21 2. Grab the grab bar and carefully turn it applying consistent pressure in order to remove the adapter still attached to the grab bar and surface (see pic. 22). 22 3.
PAGE 5
Lifetime Limited Warranty: Warranty - If this product fails in form, finish or function due to materials or workmanship at any time during the life of the product, Innovative Product Sales International LLC will replace this free of charge less shipping & handling. This does not include any claim arising from installation error, abuse, damage, alteration, misuse or normal wear.
PAGE 6
1. 2. 3. Cavities in the adhesive - caused by disturbing (e.g. pressing down) the adapter after inserting adhesive which causes air pockets and limits the bond. Insufficient curing time - caused by trying to mount the accessory prior to the suggested curing time of 12 hours (Grab bars recommend 24 hours). Separation at surface - caused by not cleaning surface properly prior to installation.