DATASHEET LCD inverter, TPI-01-0110 Version 05/14 Item no.
TABLE OF CONTENT 1.0 Revision History ---------------------------------------------------------------- page. 3 2.0 Application & Notice------------------------------------------------------------- page. 4 3.0 Environment Characteristics--------------------------------------------------- page. 4 3.1 Temperature 3.2 Humidity 3.3 Mtbf 4.0 General Requirements----------------------------------------------------------- page. 5 & 6 4.1 Input characteristics 4.2 Output characteristics 4.3 Pin assignment 4.
1.0 Revision History Revision Customer REV VER:A4 A0 Modify Item Date Prepared Approved 2010.06.
2.0 Application & Notice This DC to AC inverter is designed for the backlight of 6.4”-15.1”LCD Panel with 1 CCFL Cathode Fluorescent Lamp . . Notice: 2.1 For Safety Issue, please keep 4.0mm at least from the metal parts of the system to the inverter. Or, put a high-voltage insulator between the inverter and the metal parts to avoid the situation of Hi-POT failure or arcing---etc. 2.2 Don’t twist , deform , drop or knock the inverter during assembly. 2.3 The inverter is usually designed without the case.
4.0 General Requirements 4.1 Input characteristics PARAMETER INPUT VOLTAGE SYMBOL MIN TYP MAX UNIT Vin 8.0 12 21 V REMARK Vin=12V INPUT CURRENT Iin --- 0.35 ---- A Von/off=5V, Vadj=0V Load=70K INPUT POWER Vin=12V Pin ----- 4.2 ----- W Von/off=5V, Vadj=0V Load=70K INPUT VOLTAGE INPUT VOLTAGE Von/off Vadj 2.5 5 15 --- 0 0.5 0 ---- 3.0 V V On State Off State 0V(MAX Brightness) 3.
4.3 Pin Assignments DC Input : Location: CN1 Connector type: PH 1.25mm-6Pin or equivalent Pin No 1,2 5,6 3 4 AC Output: Location: CN2、 Connector type: Pin No 1 2 Symbol VIN GND ON/OFF ADJ SMD 3.5mm-2Pin or equivalent Symbol Vout H Vout L Description 12V Power return ON: 5.0V, OFF: 0V 0V(Max)~3.0(Min) Description High Voltage Return 4.4 Test Equipment Oscilloscope : Tektronix TDS3012B High Voltage Probe : Tektronix P6015A Multi-Meter : FLUKE45 5.
6.0 Mechanical Characteristics Item L*W*H (mm) For use with Dimension 90*12*6 6.4”-15.1” LCD’s Tolerance: ±0.5mm 7.0 Outline Dimension Unit:mm Distributed by Conrad Electronic SE, Hirschau, Germany Distributed by Conrad Electronic SE This data sheet is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by any method, e.g.