Data Sheet

ManualsBrandsNo Name PL ManualsActive ComponentsTPI-04-0502 LCD inverter 12 V DC Compatible with: CCFL backlighting (L x W x H) 166 x 32 x 11 mm

DATASHEET

LCD inverter, TPI-04-0502

Item no. 1172441

Version 05/14

LCD DC/AC INVERTER SPECIFICATION

TPI-04-0502

PART NO

VER:A1

REVISION

Distributed by Conrad Electronic SE, Hirschau, Germany

Summary of content (8 pages)

PAGE 1
DATASHEET LCD inverter, TPI-04-0502 Version 05/14 Item no.
PAGE 2
TABLE OF CONTENT 1.0 Revision History-------------------------------------------------------- page. 3 2.0 Application & Notice---------------------------------------------------- page. 4 3.0 Environment Characteristics------------------------------------------ page. 4 3.1 Temperature 3.2 Humidity 3.3 Mtbf 4.0 General Requirements-------------------------------------------------- page. 5 & 6 4.1 Input characteristics 4.2 Output characteristics 4.3 Pin assignment 4.4 Test equipment 5.
PAGE 3
1.0 Revision History Revision Customer REV VER:A1 A0 Modify Item Date Prepared Approved 2010.
PAGE 4
2.0 Application & Notice This DC to AC inverter is designed for the backlight of 14.1”-22”LCD Panel with 4 CCFL Cathode Fluorescent Lamp . Notice: 2.1 For Safety Issue, please keep 4.0mm at least from the metal parts of the system to the inverter. Or, put a high-voltage insulator between the inverter and the metal parts to avoid the situation of Hi-POT failure or arcing---etc. 2.2 Don’t twist , deform , drop or knock the inverter during assembly. 2.3 The inverter is usually designed without the case.
PAGE 5
4.0 General Requirements 4.1 Input characteristics PARAMETER INPUT VOLTAGE INPUT CURRENT SYMBOL MIN TYP MAX UNIT Vin 10.8 12 13.2 V REMARK Vin=12V Iin --- 2.0 3.0 A Von/off=5V, Vadj=0V Load=80K//10pF*4 INPUT POWER Vin=12V Pin --- 24 --- W Von/off=5V, Vadj=0V Load=80K//10pF*4 INPUT VOLTAGE INPUT VOLTAGE EFFICIENCY Von/off Vadj 2.5 5 5.5 --- 0.3 0.5 0 --- 5.0 V V On State Off State 0V(MAX Brightness) 5.
PAGE 6
4.2 Output Characteristics PARAMETER LAMP CURRENT SYMBOL MIN TYP MAX UNIT REMARK Vin=12V,Von/off=5V IL 7.0 7.5 8.0 mA Vadj=0V Load=80K//10pF*4 LAMP CURRENT Vin=12V,Von/off=5V IL 3.0 3.5 4.0 mA Vadj=5.
PAGE 7
4.4 Test Equipment Oscilloscope : Tektronix TDS3012B High Voltage Probe : Tektronix P6015A Multi-Meter : FLUKE45 5.
PAGE 8
6.0 Mechanical Characteristics Item L*W*H (mm) For use with Dimension 166*32*11 14.1”-22” LCD’s Tolerance: ±0.5mm 7.0 Outline Dimension: Unit:mm Distributed by Conrad Electronic SE, Hirschau, Germany Distributed by Conrad Electronic SE This data sheet is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by any method, e.g.