User's Manual

No Wires Needed
Page 14 of 44 Swallow 1100 PC Card User manual
4.1 Falcon 1100 ISA Card installation
Important:
before inserting the Swallow 1100 PC Card
in the PC Card Adapter, you should install the PC Card
adapter.
1. Shut Down the computer
2. Remove the metal casing of the computer
3. Place the PC Card adapter in a free ISA slot.
(without the Swallow 1100 PC Card)
4. Replace the metal casing from the computer
5. Switch on the computer
For Windows 95/98 some extra steps are required to
complete the installation.
6. A window will appear, the SCM Plug and play Swap
Box will be automatically installed
The SCM Swap Box is disabled by default.
Enabling:
7. Go to Control Panel -> PC Card (PCMCIA) and
answer <Next>, <Next> and <Finish> to complete
the installation of the PC Card adapter
Installation of the PC Card adapter is completed.
Proceed to one of the next chapters for the Swallow 1100
PC Card installation.