User's Manual

No Wires Needed
User manual Swallow 1100 PC Card Page 23 of 44
11. You see the Swallow 1100 listed as a network
adapter. Click <Close>.
12. If you have other protocols installed, they will review
their bindings and ask some questions. TCP/IP for
example will ask you whether you want to use
DHCP or give a static IP address.
13. You are asked to reboot. Insert the Swallow 1100
and reboot.
14. After rebooting, the lower-right corner of your screen
should contain an icon for Connect™. Double-click
on this icon to configure the Swallow 1100, when
necessary.
Installation of the Swallow 1100 PC Card is
completed.
Proceed to chapter 5 for the explanation of the program
Connect™.