User's Manual

No Wires Needed
Page 30 of 44 Swallow 1100 PC Card User manual
If you have not established a network connection yet then
the text “Currently not joined with a network” is shown.
In the lower half of the screen you can establish a
connection to a wireless network.
First, you have to select the network you want to join. The
selected network will be highlighted. If you don’t see the
network you are looking for you can use the “Rescan”
button. The Connect™ program will then again scan for
the available networks. To
join with the selected
network just click the
<Join> button.
After joining the network
the “Current Session
Status” will change into, for
example “Current joined
network ‘default’ using
IEEE 802.11 security”.
Dependent on the options
set by the Network
Manager.
At this moment a connection with the wireless network
has been established. If you click the <Diagnose> button
Connect™ will diagnose various aspects of the
connection. If everything is OK, checkmarks will appear
in front of each item.