User's Manual

No Wires Needed
User manual Swallow 1100 PC Card Page 37 of 44
7.2 Windows NT4
Q
: I inserted the Swallow 1100 before it was installed and
I rebooted the system. I also have another network card.
Now my other network card does not work correctly.
A
: You should insert the Swallow only after you have
installed it via the Network Control Panel.
Q
: I installed the Swallow 1100 but it does not work. What
can I do?
A
: Proceed along the following steps:
1. First, check the lower-right corner of the screen and
look for the Connect icon in the taskbar. If it is
there, proceed with step 3.
2. If the Connect icon is not there, there is something
wrong with the NT installation. Go to Start ->
Programs -> Administrative Tools -> Windows NT
Diagnostics -> Event Viewer. Make sure you are
looking at the System Log. Otherwise, go to the
Log menu item and select System. Look at the
recent entries by double clicking.
− If the description indicates there is a resource
conflict, you must adjust the IRQ or I/O Base
settings. To do this, go to Control Panel ->
Network, select the Adapters tab and select
Properties of the Swallow 1100 Wireless LAN
Adapter.