Instructions / Assembly

Caution:

DESK

●You must read this before you proceed.

Label Picture Description QTY

A TOP 1

B LEG 2

Label Picture Description QTY

①

Allen Bolt (button Head)6x16mm 14

②

Washer 6mm 14

③

Allen Key 6mm 1

Noble House Home Furnishings LLC

Page 1

PAGE 1
Caution: ●You must read this before you proceed.
PAGE 2
Before Beginning Assembly : Overview TOP (A) LEG (B) LEG (B) FRONT FACING This Desk has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Desk parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Unpack and place all parts on a clean, non-marring surface.
PAGE 3
Step 2 (B) (B) (A) Keep the TOP(A) inverted on the clean surface and bottom facing the top then place the LEG(B) on designated points of TOP (A) as shown above and fix it by using Allen Bolt (①),Washer(②)and Allen Key(③) Repeat the same process with all LEG(B) and connect it with Allen Bolt (①),Washer(②)and Allen Key (③). Step 4 Place the Desk on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Turn the Desk in a synchronised manner.
PAGE 4
Care & Maintenance ● Furniture may scratch floors. We recommend using furniture pads to protect your floors. ● Do not put hot items directly on furniture surface. ● Do not clean furniture with harsh cleansers or polish. ● Do not place furniture under direct sunlight. ● Do not place furniture near heating or cooling vents. ● Do not write on furniture without a padded barrier to protect the surface. ● Do not place furniture outside . For indoor use only. ● Not for commercial use.