Instructions / Assembly

ManualsBrandsNoble House ManualsGarden CenterDelphos Outdoor Patio Teak Acacia Wood Customizable Plant Stand

Assembly Instructions

PLANTER

CAUTION: You must read this before you proceed

Please look in the First Frame for hardware packs

CAUTION: This Planter is NOT a TOY.

Keep your child/children at bay during the assembly process.

Whenever lifting the Planter and to prevent any possible damage to it, two adults are needed to execute this

action.

Noble House Home Furnishings LLC 1/7

Summary of content (7 pages)

PAGE 1
Assembly Instructions PLANTER CAUTION: You must read this before you proceed Please look in the First Frame for hardware packs CAUTION: This Planter is NOT a TOY. Keep your child/children at bay during the assembly process. Whenever lifting the Planter and to prevent any possible damage to it, two adults are needed to execute this action.
PAGE 2
Parts List: No. Picture Description Qty A Frist Frame 1 B Second Frame 1 C Leg 2 D Box 6 E1 Right Patch 1 E2 Left Patch 1 F Corner 2 Description Qty ① Nut (M8 x 15mm) 5 ② Srews M7 x 90 3 ③ Srews M6 x 40 5 ④ Srews M4 x 25 5 ⑤ Allen Wrench 1 ⑥ Screwdriver No provided Hardware: Table Hardware: No.
PAGE 3
Assembly Preparation: Before Beginning Assembly: Read instructions, cover to cover. Have 2 adults on hand for assembly. Do not assemble on flooring or carpet. Assemble on a clean non-marring surface (packing foam). Save all packaging until finished.
PAGE 4
Assembly Steps: OVERVIEW: This Planter has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Planter parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step1: Unpack and place all parts on a clean, non-marring surface.
PAGE 5
Step 2: Place the Frist Frame (A) and Second Frame(B) on surface as shown above. Then position the Right Patch (E1) and the Left Patch (E2) to the Frist Frame (A) and Second Frame(B) using Nuts (①) and Screw (④) with Allen Wrench (⑤) and Screwdriver (⑥) as shown in picture above. Do not fully tighten the Screws.
PAGE 6
Step 4: With the assistance of your adult partner, stand the Planter up. Place the Planter onto a flat, level surface. Attach the Corner (F) with the Leg (C) and the second Frame (B) using Screw (③) with Allen Wrench (⑤) as shown in picture above. In a sequential manner, gradually tighten all Bolts and Screws at all joints until evenly secured. Step 5: Attach the Box (D) to the Frist Frame (A) and Second Frame(B) as shown in picture above. Then EXERT pressure, floorwards onto the Planter with both hands.
PAGE 7
Care & Maintenance Noble House Home Furnishings LLC 7/7