Caution : You must read this before you proceed ROCKING CHAIR Noble House Home Furnishings LLC Page 1 OF 8
Label Description QTY A Chair Backrest 1 B Chair Base Body 1 C Right Wing 1 D Left Wing 1 E Right Leg 1 F Left Leg 1 Description QTY ① Bolt(M8*55MM) 9 ② Bolt(M6*40MM) 3 ③ Spring Washer Ring 9 Label Noble House Home Furnishings LLC Picture Picture Page 2 OF 8
④ Flat Washer Ring (M8) 9 ⑤ Flat Washer Ring (M6) 3 ⑥ Allen Wrench(M8) 1 ⑦ Allen Wrench(M6) 1 Before Beginning Assembly: *9 *3 *9 *9 *3 M6*1 M8*1 Noble House Home Furnishings LLC Page 3 OF 8
OVERVIEW Left Wing(D) Right Wing(C) Chair Backrest(A) Chair Base Body(B) Left Leg(F) Right Leg(E) FRONT FACING This ROCKING CHAIR has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the ROCKING CHAIR parts, the above picture is to help you put the various parts into perspective. Please read through the instructions here below to familiarise yourself with the parts and steps before assembly.
Step 2 *9 *3 *9 *3 *9 M6*1 M8*1 *1 Chair Base Body(B) *1 *1 Turn the Chair Base Body(B) upside down and remove the Left Wing(D), the Left Leg(F), the Right Leg(E) and the Hardware from the underside of Chair Base Body(B) as shown above. Step 3 Right Leg(E) Chair Base Body(B) Left Leg(F) ⑥ ① ③ ④ Attach the Left Leg(F) to the Chair Base Body(B), using Bolts(①),Spring Washer Rings(③), Flat washer Rings(④) and the Allen Wrench(⑥), turning clockwise until tight.
Step 4 Left Wing(D) Chair Backrest(A) Position the Chair Backrest(A) on it's left side. Align the mounting positions of the Left Wing(D) with the left side of the Chair Backrest (A). Then use your hand to slide the Left Wing(D) forward and ensure it locks into position. Repeat the same process with the Right Wing(C).
With assistance from your adult partner, hold up the fully assembled backrest with Wings and stand behind the chair. Insert the small metal arms on the sides of the Chair Backrest(A) into the prefabricated slide lock gadgets on the Chair Base Body(B) as shown above. Firmly but gently, push the Chair Backrest(A) downwards until the Backrest is fully slotted and locked into position. Step 7 Smooth down the fabric flap on the Chair Backrest.
Noble House Home Furnishings LLC Page 8 OF 8
